220V Manual Lifting Lab Digital High-Speed Grinding Disperser Homogenizer Mixer

Description

20140320
Lifting  Vertical Timing High-speed Grinding and Dispersing Machine
One machine, multi-usage. High efficiency, Good mixing effect.
Easy to wash, Manual lifting, simple and convenient.
It can realize scattered, stir, mix. Used in coatings, printing ink, paste,  dye, pesticides and cosmetic industries and so on.
Can realize refining grinding.
It is widely used in laboratory science test, production simulation and to  develop new products, and it is also colleges, universities and research  institutions' ideal experimental equipment.
Specification
Motor Power: 1100W
（220V,50HZ
）
The Handling Capacity is 2~5 kg  (water as medium)
Adjustment range: Frequency  control 60-6000r/min
Stirring and dispersing impeller diameter:φ
50mm
:
φ60mm;φ
80mm
Medium Viscosity: 10000cp below
Speed Range:0-8000r/min
Lifting stroke:450mm
Sand Grinding Diameter: Phi  60MM
Barrel capacity
：
1.5L
Overall Size (L * w * h):  14.3*15.7*31.5’’(45 * 40 * 80cm)
Control Range: 100-8000r/min
Measuring Resolution: 10r/m
Control Accuracy: + 0.2%F.S
Transition Time: <8S
Speed Setting Step: 100r/min
Suitable for Motor Power: 1.1KW
Net  Weight: 66lb(35KG)
Intelligent controller button description:
The  Intelligent controller instrument has two working modes.
Timing
:
Press the positioner konb once, and turn the positioner knob to set the working  time when the instrument window displays”-
-
-
-
-
-
-”.
After setting ,wait for the window to display”inverted 7”,then display”0000”.
At  this time , the corresponding speed can be set by the positioner knob, and the  instrument will automatically stop working when the set time ends.
Select untimed :
Turn on the machine ,wait for the meter window to display “0000”,and turn the  positioner konb counterclockwise to adjust teh corresponding speed.
Stop  working
:
I
n  any working condition ,press the locator knob once to stop the machine.
Features
High-speed Disperser, designed for laboratory. Easy to operate  and with stable performance.
The equipment adopts  electronic constant speed regulation circuit, digital directly displays spindle  and rotation speed.
It equipped with scattered impeller and Sanding disc, and can  adapt to the need of different experiments.
Also according to the shaft speed that displayed it can  directly calculate the relationship among the mixing,
linear velocity of the disperse blades and the material  viscosity and chemical reaction rate.
It can provide the right data for mass production.
Used and  maintain:
1, the use of sand mill or  dispersed impeller and rotating shaft fixed.
2. Adjust the rotating shaft  and the high position of the capacity, lock the motor seat and the container,  insert the material and cover the container cover.
3. Switch on the power, turn on  the switch, wait for the reset of the display to zero, then press the touch  button to increase or decrease when the speed is required.
4, the motor is a series of  motor, when the rotation of the brush sparks, explosion-proof workshop is not  appropriate.
5, the speed is greater than  4000r/min, should not open air machine.
6, when the motor brush less  than 10mm, should be replaced.
Intelligent  motor speed control system instructions :
Intelligent motor high speed controller adopts intelligent  control technology, and realizes stepless speed regulation for series connected  motor. With the digital PID technology, the control accuracy is high, the system  structure is simple, stable and reliable.
Detail:
Item Included(022225)
220V Grinding Disperser  Homogenizer Mixer Machinex1
Thicken material bucketX1PCS
Handlesx
2pcs
I
mpeller  x1pc
B
rush  x1
pc
Plastic mixingx1pc
Nut x1pc
On Dec-16-20 at 21:33:30 PST, seller added the following information: