Crest Ultrasonic, P2600HT PowerSonic Ultrasonic Cleaner & Stainless Steel Basket

Description

There is a very tiny dent that is hardly noticeable. You can see it in the 3rd picture. It was never used, but I have tested it to make sure it worked. This unit retails for around 00 plus taxes. It also comes with a stainless steel basket that retails for 5, so very close to 50 retail. Will only accepts a reasonable offer, and I will not reply to any LOWBALL OFFERS. So if you are sending me an offer, think 1st if you were selling this unit and if you would accept this offer that you are offering. This will be shipped through fedex in 2 boxes. and cannot ship to a P.O.Box. They also must be signed for when delivered.
Auto repair, small engine repair, machine and custom-fabricating shops quickly learn the advantages of an ultrasonic cleaning system. For these and similar organizations the 7-gallon capacity Crest Powersonic P2600H-45 (CP2600HT) ultrasonic cleaning system is not only desirable, it is a necessity to avoid time-consuming and laborious manual scrubbing using harsh solvents in parts washing tanks.
Ultrasonic cavitation created by the Powersonic P2600H-45 (CP2600HT) 45 kHz transducers produce the billions of minute bubbles that implode on contact with all surfaces of parts immersed in the ultrasonic cleaning solution. These bubbles penetrate cracks and crevices impossible to reach by manual methods to quickly and safely strip away contaminants and other unwanted particles. Meanwhile you and your staff can attend to other business in the shop.
Develop your ultrasonic cleaning system routine
Biodegradable ultrasonic cleaning solution concentrates are available for virtually all cleaning and restoration tasks. With the formulations that match your needs you can quickly establish cleaning system routines. Here are some typical steps:
Prepare fresh solutions and add them to the ultrasonic cleaning tank fill line. Activate the unit for about 45 minutes to degas the solution by removing cavitation-inhibiting trapped air.
Set cleaning time and cleaning temperature controls according to what is being cleaned.
Place parts to be cleaned in the basket (available separately) taking care they do not contact each other. Lower them into the solution.
At the end of the cycle remove the parts and inspect. Proceed with follow-up steps.
Ultrasonic cleaning system maintenance tips
Skim off oils and other contaminants that rise to the surface of the ultra sonic cleaner and set them aside for proper disposal. When cleaning takes longer or solutions become discolored it’s time to replace them. Drain the tank and set the spent solution aside for disposal along with skimmings. Clean the tank according to the manufacturer’s instructions then fill it with fresh solution.
More Crest Powersonic P2600H-45 (CP2600HT) ultrasonic cleaning system features and benefits
Cavitation-resistant stainless steel tank for a long service life
Stainless steel enclosure resist spills and will not crack
2-year warranty on parts and labor protects your investment
300 watts average sonic power provides efficient ultrasonic cleaning
Side mounted drain control to ease solution replacement
Lifetime heater warranty – protects against burnout