-40%
Lab Homogenizer Disperser Mixer AD300L-H 300-18000rpm Digital Display 28&36G220V
$ 344.58
- Description
- Size Guide
Description
Lab Homogenizer Disperser Mixer AD300L-H 300-18000rpm Digital Display 28 & 36 G1. Powered by micro motors of compact-structured Series excitation type;
2. Drive motor: quality engineering Cast aluminum molding;
3. Stainless steel operation head and speed controller;
4. Digital display;
5. Speed controller applies IC speed detection -the constant power speed regulation technology, which offers effective compensation for the speed variation due to Variation of load and power supply voltage fluctuation.
Specifications
Model
AD300L-H
Rated voltage
220±10% VAC
Rated frequency
50/60 Hz
Input power
510W
Output power
300W
Rated torque
96 N·cm
Work mode
S1 (continuous)
Speed control
Yes
Speed range
5000~18000 rpm
Dynamic detection speed
Yes
Speed memory function
Yes
Overload protection function
Yes
Speed display
×10 rpm LED
Timing control range
1
~
1000 min
Work head maximum torque
92 N.cm
Work head Material
stainless steel 304#
Bearing material
PTFE
Standard configuration
28G, 36G
Permissible ambient temperature
Lower than 40°C
Permissible relative humidity
Less than 80%
Size of the mixer (T x B x H)
215×310×720 mm
Product Weight
9.7 kg
Work head parameter
Work head Model
28 G
36 G
Mixing capacity (H
2
O) ml
90~7000
150~13000
Mixing processing viscosity (cp)
6000
7000
Rotor maximum linear velocity (m/s)
19
27
Work head Immersed in liquid height (mm)
60/160
60/160
Work head Diameter (mm)
28
36
Work head length
(mm)
240
240
Permissible ambient temperature (°C)
120
120
Attention:
1)To protect the electrical motor, please do not run the mixer over 20 minutes consecutively for each use.
2) Please ensure the motor cools down completely after each use and before the next use; otherwise, the motor may be damaged.
3) Idling may damage the machine. Please place the operating head in the liquid before use. Then turn on the machine, and rotate the speed adjusting knob rightward slowly.
order
item
number
order
item
number
1
Heterogeneous host
1
6
Operating head
2
2
Base
1
7
Brusher(Spare)
1
3
Supporting stand
2
8
Product certification
1
4
Beam
1
9
Operation manual
1
5
Supporting and fixing frame
1