Laboratory Adjustable High Speed Homogenizer FSH-2A

Description

Laboratory Adjustable High Speed Homogenizer FSH-2A AC110V or 220V 185W Max 22000rpm Biological Chemical Cell research tool
Note: Please choose the Correct Voltage Version!
It is mainly used for crushing animal and plant tissue homogenate and cell dispersion. At present, it has been widely used in China, and has become a necessary instrument for biochemical research, animal and plant cell research, agriculture, animal husbandry, petroleum industry, chemical industry, pharmaceutical industry and food industry.
Characteristic：
1.It adopts internal suction homogenate structure (internal cutting tool) with high speed. It can be used to homogenize, emulsify and extract trace organic compounds, lipid solutes and soluble organic solvents in water between two immiscible liquids.
2.All kinds of animal and plant tissues can be homogenized and mixed.
3.It can break cell membranes to separate and break DNA strands into small molecules at different speeds.
4.It can be used as agitator at low speed with digital display of rotational speed and intuitive reading.
Technical index
：
Motor speed：22000r/min
Homogenizing knife 1：8000～18000r/min
Homogenizing knife 2：8000～20000r/min
Continuous working hours：3min
Power：185W
Outline size：300×250×400mm
Weight：About 7Kg
Ambient temperature：-10～45℃
Supply voltage：110V 60Hz
Use precautions：
The instrument is placed on a horizontal worktable, and the required homogenizing cutter must be in place. When the power supply is connected to the test machine, the plum knife head is submerged in the water with a cup or utensil filled with water. The power switch is turned on, the speed knob is adjusted slowly to fast, and there is no obvious metal friction (such as metal friction, switch off, loosen the cutter 6mm tightening bracelets to rotate the fixing jacket randomly). Turn up and install in place, then tighten up. You can't work until you've finished.
Cut the plants or organisms that need to be tested into small pieces or pieces, place them in randomly equipped glassware, clamp them in the middle of the magnet bracket (heptagon), loosen the 8mm fastening bracelets of the fixed motor base, slowly move down the orifice of the utensil, make the head of the homogenate 2-3mm from the bottom of the utensil advantageous, and tighten the 8mm bracelets again. The working time of the experiment should not exceed 5minutes at a time.