Milty Pro Zerostat 3 Anti-Static Gun makes record & other surfaces static-free !

Description

The MiltyPro Zerostat 3 is highly rated for its ability to improve the sound quality of records and CDs by removing static.
The Zerostat 3 incorporates a unique Piezo Crystal device which generates a positive electrical charge of Ions with on gentle squeeze of the trigger, and a negative charge on the material. Constructed from a durable hard plastic, it requires no batteries or refills and is a long lasting alternative to cleaning brushes.
In the laboratory the Milty Pro Zerostat 3 antistatic gun keeps film glass plastic ware and lenses dust and lint free.
It also prevents charged particles from flying during weighting or transfer of particles. And the Zerostat gun finds wide use among those who possess and maintain phonograph record collections.
Each Zerostat unit is shipped with complete instructions and information about a special ‘Test Procedure’ to validate that the unit is working properly. Each Zerostat unit has a ‘two cycle’ type of operation, when the trigger is squeezed, positive ions are generated and when the trigger is relaxed, negative ions flow. This means that it is possible to induce a charge on a neutral surface using the Zerostat. If the trigger is squeezed and the Zerostat is then removed from the surface (before allowing the trigger to return to its original position) a positive charge will be induced. Similarly, pointing the Zerostat at the surface only for the release of the trigger will induce a negative charge.
Each squeeze of the trigger results in a discharge, when stated in units of charge, is 1.5 Coulombs. One can reasonably expect on the order of 10,000 such ‘squeeze cycles’ during the lifetime of the Zerostat. The Zerostat needs no batteries or electrical supply nor does it contain any radioactive components.
The Zerostat is lightweight, highly portable, and easy to control and handle.
The Milty Pro Zerostat 3 antistatic gun is lightweight highly portable and easy to control and handle.   Squeeze the trigger slowly.  Repeated rapid squeezing may void the 90 day warranty.  It is possible to shock yourself if you hold your finger on/in the barrel while squeezing the trigger so keep away from children.  The plug pictured contains a neon light that will flicker as you squeeze trigger to verify operation.
Operation is simple: point the gun at the object you want de-staticised and SLOWLY pull the trigger. If you hear any "clicks" you've pulled it too fast. Whatever you do, DON'T press the "muzzle" against any part of your body and squeeze the trigger. It really hurts!
This amazing little device known as the Zerostat Antistatic Gun is an antistatic "generator" which has numerous applications in any microscopy laboratory. Just squeeze the "trigger" of the Zerostat and a steady stream of ions is released. The "magic" comes from two powerful piezoelectric crystals and a patented compression trigger. Originally developed for removing dust from "vinyl" or before that, normal "phonograph records", in later years the Zerostat antistatic gun was discovered to have great applicability for use in a photographic darkroom to remove dust from film and negatives. After that, a wider range of applications came into being when people running SEM labs found out that it was also idea for eliminating dust from critical samples or other critical surfaces when the dust attraction was being caused by electrostatic charge. Others have reported that certain insulating specimens, when treated this way, can actually be viewed (admittedly briefly) by SEM without the need to apply further coating.
In the laboratory, the Zerostat keeps film, glass, plasticware, and lenses dust and lint free. It also prevents charged particles from flying during weighting or transfer of particles. And the Zerostat gun finds wide use among those who possess and maintain phonograph record collections.
Each Zerostat unit is shipped with complete Use Instructions and also, information about a special "Test Procedure" to validate that the unit is working properly.
How it Works
Each Zerostat unit has a "two cycle" type of operation, when the trigger is squeezed, positive ions are generated and when the trigger is relaxed, negative ions flow. This means that it is possible to induce a charge on a neutral surface using the Zerostat. If the trigger is squeezed, and the Zerostat is then removed from the surface (and before allowing the trigger to return to its original position), a positive charge will be induced. Similarly, pointing the Zerostat at the surface only for the release of the trigger will induce a negative charge.
How much charge is given off?
Each squeeze of the trigger results in a discharge, when stated in units of charge, is 1.5 Coulumbs.
How long will it last?
One can reasonably expect on the order of 10,000 such "squeeze cycles" during the lifetime of the Zerostat unit. The Zerostat needs no batteries or electrical supply nor does it contain any radioactive components.
Where can it be used?
The Zerostat gun, theory, will work in any atmosphere, but we would add great caution before using it with or in proximity to flammable or combustible gases/liquids.
Spare parts:
The Zerostat 3 is designed to be a disposable (throw-away) product. It is not built to be taken apart and there are not replacement parts.
What does it weigh?
The net weight of the Zerostat gun is 135g (0.297 lbs) The unit is highly portable and easy to control and handle.
Give it a shot!
The Zerostats charging element should last many years, and its construction is rugged enough to survive any abuse.