Non-contact Ultrasonic Homogenizer Sonicator processor Cell Disruptor Mixer 900W

Description

Non-contact Ultrasonic Homogenizer Sonicator processor Cell Disruptor Mixer
900W with Cup Horn
1. product discription:
Cup type ultrasonic processor, also called non-contact ultrasonic processor, it is better than traditional non-contact ultrasonic disruptor is bigger, the ultrasonic amplitude of the output energy is used for sterile, across the heart tube can interrupt, broken cell chromosome.Non-contact goblet containers (suitable for handling biohazards and harmful samples) with the mute compression device.Compared to conventional probe ultrasonic processing device, probe in direct contact with the sample need to be repeated using the same probe, easy to cause the sample cross contamination.Since each probe into the depth of the sample is different, each have different energy distribution of ultrasonic, affect the repeatability and accuracy of the experimental results.
2.product Advantage:
A test multiple samples at the same time, the experiment of high efficiency;Without frequent operation probe, the samples in a separate closed tube and avoid cross-contamination;Optional (5 ~ 100 degrees) low temperature thermostat, facilitate sample work under low temperature water bath condition, energy distribution uniformity, ultrasonic role fully;Standardization of ultrasonic flexible parameter setting, the experimental steps, experimental repeatability, high reliability.
3.  Main Parameters:
(1) Power / Signal Generators:Model: FB-900T
(2) Net output power: 900W; frequency: 20KHz  net weight: 8kg
(3)Timer: LCD, 1 second - 99 hours (adjudtable), Power regulation: 0% - 100%,
go forward one by one (1%)
Temperature setting: -30--300 C go forward one by one (1C)
Pulser: figure, closed cycle, open cycle: 1 second -99 hours, 99 minutes, 99 seconds arbitrarily set
(4) Piezoelectric frequency energy converter:CV33, PZT lead zirconate titanate piezoelectric ceramic
Diameter: 73mm Length: 170mm
Weight:950g
Cable length: 150cm
(5) Standard configuration probe: titanium alloy material TI-6AL-4V, Head diameter (Random probe): 50mm
Capacity: 1ul-2ml; 4-8 as a sample, Total length: 145mm, weight:600g
(6) power supply : 220V/50HZ
(7)Disposition: temperature sensor:0--300
℃
（
8
）
Disposition: soundproof box
(9) Optional scope of 0.1 to 5 ml of four or eight samples
(10)Optional accessories: - 5 ~ 100
℃
external tank cryogenic cooling cycle