Spark Holland Triathlon Autosampler HPLC with cooling

Description

Welcome to our auction
HPLC Autosampler
Spark Holland
Triathlon
with tray cooling
100 ul loop installed
The Spark Holland Triathlon Autosampler is an autosampler that offers a wide variety of possibilities for HPLC. It offers three different methods of injection for an analytical run:
• Flushed Loop: The sample loop is completely (quantitatively) filled with sample, resulting in extremely good reproducibility.
• Partial Loopfill: The sample loop is partially filled with sample; this means low sample loss and programmable injection volumes.
• µL Pick-up: After aspiration of sample, the sample is transported into the loop with transport liquid (mobile phase); this means no sample loss.
The Triathlon uses a syringe to aspirate the sample from a vial into the sample loop. To prevent contamination of the syringe, the Triathlon is equipped with a buffer tubing between the syringe and the injection valve. Wash solvent is used to remove the sample from and to rinse the buffer tubing and sample needle.
Autosampler was tested.
Powers up, tray cooling works and autosampler injects samples.
Last photo attached to auction shows multiple injections of 10 ul of sample to show proper functionality.
Shipment
price on request. Estimated delivery in EU 200 euro.
If you want to buy it, visit us
in Gdańsk (Poland)
and check the equipment.
Price includes
0
% VAT.
For further information contact us by e-mail: [email protected] or by phone +48 669100366
You need other laboratory equipment including HPLC, software, shakers, stirrers  and glassware see other our auctions or contact us.