Stainless steel Lab Stirrers Tissue mashed Mixers Homogenizers Shaker stirrers

Description

Lab mashed Stirrers 120W Tissue mashed Mixers Homogenizers Shaker Stirrers 1k ml
Lab mashed Stirrers 120W Tissue mashed Mixers Homogenizers Shaker Stirrers 1k ml
Product parameters:
Voltage
110v 60Hz
Rated power
120w
Size
28*22*48cm
Weight
5kg
Material
Stainless steel
Speed
0 to 8000 to 12000 rpm
Capacity
1000ml
use:
1. Scientific research: researches on biochemistry, plants, nutrition, etc. can be crushed with this machine.
2. Medical treatment: Both laboratories and medicines can be used, especially suitable for mashing tissue therapy medicines.
3. Chemical pharmacy: manufacturing colloidal emulsion and mixing of solid-liquid characteristics, such as manufacturing oily blend of mycin, manufacturing concentrated beef liver mash, etc.
4. Biological products: In the process of manufacturing biological drugs, the stirring and mixing of liquid drugs and the mashing of microbial culture medium must be carried out under aseptic operation, and all the utensils must be strictly disinfected to avoid infection by bacteria. The structure of this machine All aspects meet the requirements of aseptic operation.
5. Food industry: it can be used to make meat sauce, milk cool, fruits and vegetables for stirring and mashing.
This machine is not suitable for high-viscosity liquids and hard objects (bone, stone, etc.).
Features:
The rotating speed of the masher is extremely high, reaching 12,000 revolutions per minute. The material is split, crushed, blended and other processes are carried out at the same time through the motor rotating and driving the rotary knife in the glass, so that the material is stirred and mashed. The machine is small in size, low in power consumption and high in work efficiency.
packing list:
Power cord+mixing cup+blade*1+instructions
Usage and precautions:
1. First match the cutter shaft with the machine shaft, and then move the spring element of the coupling down into the ruler groove (moving the foot down and the step firmly) before the machine can operate.
2. Before starting up, you must pay attention to whether the voltage on the power supply and the motor match.
3. The carbon brush should be checked frequently. If it is too short, replace it with a new one. If the carbon brush sparks are found to be abnormal, stop using it immediately, check the cause of the obstacle, and repair it before using it. So as not to burn out the rectifier and coil.
4. When the stainless steel cup is installed, it needs to be aligned with the axis of the machine, centered, and there is no shaking on all sides before it can be turned on.
5. The machine is not suitable for idling, and a small amount of liquid or grease must be put in when using it.
6. Accelerate slowly when putting in the material. Start the slow gear first, then the fast gear, but the slow gear can only be used as a starting point and should not be used frequently.
7. Do not exceed 3 minutes each time.
On Jul-30-21 at 01:16:47 PDT, seller added the following information: