Ultrasonic Cleaner 3.2L 60/120w Degas Ultrasonic Machine Digital Sonic Cleaner

Description

Document
Product Description
operation steps
Add cleaning fluid to the cleaning tank as required for cleaning, at least 1/2 of the tank body.
Connect the power plug correctly, make sure that the power supply is reliably grounded!
Disassemble the parts to be cleaned as much as possible, and use high-pressure water guns, wire brushes, shovel blades or other tools to artificially assist pretreatment of the soil, heavy oil and heavy carbon deposits  on the surface of the parts to ensure the service life of the cleaning fluid And the speed and effect of cleaning.
Put the parts to be cleaned in the cleaning tank, and place them without overlapping to ensure that the parts are completely submerged by the cleaning liquid.
Parameter setting
1、Turn on the main power switch on the back of the machine, and the machine is in a power-on state;
2、Press the "time+" key once, the cleaning time will increase by 1 min, press the "time-" key once, the cleaning time will decrease by 1 min, and the time range is adjustable from 0 to 30 minutes;
3、Press the "temperature+" key once to increase the set temperature by 1°C, press the "temperature-" key once to set the temperature down by 1°C, and the temperature range is 0-80°C
Ultrasonic function setting
There are three working function options for ultrasound: normal, degassing, and
semiwave
.
Press the corresponding ultrasonic function key once, the work indicator light is on, and the machine works according to the specified parameters.
When the machine is turned on, it is in normal working condition;
Press the "Degassing" button, the degassing function will start, the degassing indicator will be on, click again to cancel the degassing function;
Press the "
Semiwave
" button, the
semiwave
function will start,  the
semiwave
indicator will be on, click the
semiwave
function again to cancel.
heating
When the machine is working, there are two temperature display screens : the set temperature value and the actual temperature value reached.
Tap the "heating" button, the actual temperature will keep flashing, and the heating function will be turned on.
If the actual temperature is lower than the set temperature, the heating indicator will light up, indicating that the heating system is heating.
If the actual temperature reaches the set temperature, the heating indicator light will go out. Then lightly press the "heating" button to stop the heating function.
When the ultrasonic is activated, the cleaning machine will make a "squeak" sound, indicating that the ultrasonic is operating normally. Generally, it is cleaned regularly for 5 to 30 minutes. After the cleaning is completed, the wave is automatically turned off, and the parts are taken out for post-processing.
Use a high-pressure water gun to remove the residues on the surface of the parts, and use an air compression gun to remove the residues in the holes. Parts that need rust prevention will be treated separately. In order to improve the cleaning effect, when time permits, the cleaning time of the parts in the cleaning solution can be appropriately extended. In the actual operation process, in order to improve the cleaning efficiency, a process flow of dismantling and cleaning can be adopted.
Disconnect the power of the whole machine when shutting down; pour out the cleaning fluid, and clean and maintain the tank and the periphery with a clean rag for the next use
Features & Details
【ULTRASONIC & DEGASSING】-Ultrasonic vibration treatment method, reliable penetrating power, high-power industrial-grade vibration head, high-frequency cleaning. The degassing function protects the product from oxidation or other chemical reactions with the air during the cleaning process, increasing gloss, and improving cleaning efficiency.
【
DEEP CLEANING & HEATING FUNCTION】- Built-in high-frequency vibration technology can excite the transducer. The cleaning frequency of 40KHz can remove stains on items in a few seconds. With a constant temperature heating function, it can improve the cleaning effect. It can heat up to 80℃.
【SMART CONTROL PANEL】- Smart control panel is more stable and durable than traditional buttons. Simple and easy to operate, the cleaning cycle time can be freely set (0-30 minutes), select the required time, and it will automatically turn off after cleaning.
【SEMIWAVE FUNCTION】- The ultrasonic jewelry cleaner has Semiwave function. You can turn on the half-wave to reduce the power (for example, 100W, only 50W after turning on the half-wave, but only for high energy, not for heating power). This function can protect some items (requires slow cleaning, cannot Strong cleaning).
【SAFETY PROTECTION】 - Double safety switches with ground wire, industrial power cord, insulated handle, high temperature, anti-static, more secure. Sonic jewelry cleaning machine adopts a 3D cooling system, fast heat dissipation, protection circuit, increase service life.
Key Features
Degassing Function
The degassing function prevents the product from oxidizing or other chemical reactions with the air during the cleaning process; an ultrasonic ring cleaner equipped with a degassing model achieve this faster than unloaded filters.
Heating Adjustment Function
The heating temperature can be adjusted to 80℃, which can reduce the adhesion strength of oil and wax to specific materials to be cleaned, improve the cleaning effect, increase the water temperature, and perform cleaning quickly and effectively.
Time Setting 0-30mins
You can set the cleaning cycle time (0-30 minutes), select the required time, and observe the digital display until the cleaning is completed. The ultrasonic diamond ring cleaner will automatically shut down.
Upgraded Control Panel
The humanized 20-degree tilt design interface makes the operation more convenient. Professional silver jewelry cleaner, each feature is labeled.
Stainless Steel & Upgrade Handle
The lid and tank is made of sus304 stainless steel, it has the characteristics of corrosion resistance, heat
resistance, and water leakage prevention.The upgraded handle is anti-static and more secure.
Wide Application
This sonic jewelry cleaner is suitable for cleaning jewelry, glasses, brooches, dentures, toothbrushes, dentures, and other valuables! Ideal equipment for optical shops, jewelry shops, watch shops, mobile phone repair shops.
3.2L Professional Ultrasonic Cleaner
This ultrasonic cleaner has functions of degassing, heating, semi wave, and timing to achieve a gentle and robust cleaning effect without damaging your valuables while making them look like new. This ultrasonic cleaner is suitable for cleaning jewelry, glasses, brooches, dentures, toothbrushes, dentures, and other valuables! Ideal equipment for the optical shop, jewelry shop, watch shop, mobile phone repair shop, dental, office, home, and other stuff.
Operating voltage: 110V
Ultrasonic frequency: 40kHZ;
ultrasonic power: 60W/120W
; time adjustable: 0-30min; temperature adjustable: 0-88℃
Ultrasonic dual-power interactive work, cleaning more finely, completely solve the blind area of ultrasonic cleaning
Four-corner cushioned SUS304 stainless steel sound-reducing cover, so that the noise generated during work is smaller
SUS304 stainless steel special cleaning basket
Heating temperature setting, heating switch, dual power working mode, degassing working mode,
semi wave
working mode, adjustable working time, etc.
High circuit conversion efficiency: 98%
6L and above specifications have a drainage device to quickly discharge waste liquid
Specification:
Material: SUS304 Stainless steel
Voltage: 110V
Capacity: 3.2L
Ultrasonic power: 60W/120W
Heating power: 100W
Ultrasonic frequency: 40KHZ
Tank size: 240x135x100mm
Time Setting: 0-30mins
Temperature setting: 0-80℃
Gross Weight: 3.9kg/8.62lbs
Package Size: 34x25x31cm/13.38x9.84x12.20inch
Package Content:
1 x Ultrasonic Cleaner
1 x Jewelry Cleaning Basket
1 x Outlet Pipe
1 x Buckle
1 x Power Cord
1 x Jewelry Cleaning Ball
1 x Raw Tape
3.2L 60/120W
4.5L 90/180W
6.5L 90/180W
10L 120/240W
Capacity
3.2L
4.5L
6.5L
10L
Ultrasonic Power
60W/120W
90W/180W
90W/180W
120W/240W
Heating Power
100W
200W
200W
200W
Tank Size
240 x 135 x 100 mm
300 x 150 x 100 mm
300 x 150 x 150 mm
300 x 240 x 150 mm
Material
SUS304 Stainless Steel
SUS304 Stainless Steel
SUS304 Stainless Steel
SUS304 Stainless Steel
Voltage
110V
110V
110V
110V
Frequency
40KHZ
40KHZ
40KHZ
40KHZ
Time Setting
0-30 mins
0-30 mins
0-30 mins
0-30 mins
Temp Setting
Room Temperature-80℃
Room Temperature-80℃
Room Temperature-80℃
Room Temperature-80℃
15L 180/360W
20L 210/420W
22L 240W/480W
30L 300/600W
Capacity
15L
20L
22L
30L
Ultrasonic Power
180W/360W
210W/420W
240W/480W
300W/600W
Heating Power
300W
300W
500W
500W
Tank Size
300 x 300 x 150 mm
300 x 300 x 200 mm
500 x 300 x 150 mm
500 x 300 x 200 mm
Material
SUS304 Stainless Steel
SUS304 Stainless Steel
SUS304 Stainless Steel
SUS304 Stainless Steel
Voltage
110V
110V
110V
110V
Ultrasonic Frequency
40KHZ
40KHZ
40KHZ
40KHZ
Time Setting
0-30 mins
0-30 mins
0-30 mins
0-30 mins
Temperature Setting
Room Temperature-80℃
Room Temperature-80℃
Room Temperature-80℃
Room Temperature-80℃
SHIPPING
ABOUT US
PAYMENT
RETURNS
CONTACT
WARRANTY
Welcome to our eBay store. As a leading and emerging company in manufacturer and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.
We accept
Pay
pal
payment only.
Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.
We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
DELIVERY DAYS: 1-4 DAYS (1-3 DAYS FOR 99% OF US 48 STATES)
24 HOURS SHIPPING OUT
SHIP FROM CA & TX & KY & NJ WAREHOUSE
California Warehouse: City of Industry, CA
Texas
Warehouse
:  Houston, TX
Kentucky
Warehouse
: Hebron, KY
New Jersey
Warehouse
: Perth Amboy, NJ
All of our items are backed with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation
Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
Email Customer Support:
9:00am-2:00am
PST Sunday-Friday
All emails will be responded to within
12-24 hours
This item comes with 24 months Warranty from the date of customers purchased it. Special circumstances will be listed clearly in the listing.
If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.
Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault.
Replacement products are provided with the same warranty as the returned products.
3.2L Professional Ultrasonic Cleaner
This ultrasonic cleaner has functions of degassing, heating, semi wave, and timing to achieve a gentle and robust cleaning effect without damaging your valuables while making them look like new. This ultrasonic cleaner is suitable for cleaning jewelry, glasses, brooches, dentures, toothbrushes, dentures, and other valuables! Ideal equipment for the optical shop, jewelry shop, watch shop, mobile phone repair shop, dental, office, home, and other stuff.
Operating voltage: 110V
Ultrasonic frequency: 40kHZ;
ultrasonic power: 60W/120W
; time adjustable: 0-30min; temperature adjustable: 0-88℃
Ultrasonic dual-power interactive work, cleaning more finely, completely solve the blind area of ultrasonic cleaning
Four-corner cushioned SUS304 stainless steel sound-reducing cover, so that the noise generated during work is smaller
SUS304 stainless steel special cleaning basket
Heating temperature setting, heating switch, dual power working mode, degassing working mode,
semi wave
working mode, adjustable working time, etc.
High circuit conversion efficiency: 98%
6L and above specifications have a drainage device to quickly discharge waste liquid
Key Features
Degassing Function
The degassing function prevents the product from oxidizing or other chemical reactions with the air during the cleaning process; an ultrasonic ring cleaner equipped with a degassing model achieve this faster than unloaded filters.
Heating Adjustment Function
The heating temperature can be adjusted to 80℃, which can reduce the adhesion strength of oil and wax to specific materials to be cleaned, improve the cleaning effect, increase the water temperature, and perform cleaning quickly and effectively.
Time Setting 0-30mins
You can set the cleaning cycle time (0-30 minutes), select the required time, and observe the digital display until the cleaning is completed. The ultrasonic diamond ring cleaner will automatically shut down.
Upgraded Control Panel
The humanized 20-degree tilt design interface makes the operation more convenient. Professional silver jewelry cleaner, each feature is labeled.
Stainless Steel & Upgrade Handle
The lid and tank is made of sus304 stainless steel, it has the characteristics of corrosion resistance, heat
resistance, and water leakage prevention.The upgraded handle is anti-static and more secure.
Wide Application
This sonic jewelry cleaner is suitable for cleaning jewelry, glasses, brooches, dentures, toothbrushes, dentures, and other valuables! Ideal equipment for optical shops, jewelry shops, watch shops, mobile phone repair shops.
Specification:
Material: SUS304 Stainless steel
Voltage: 110V
Capacity: 3.2L
Ultrasonic power: 60W/120W
Heating power: 100W
Ultrasonic frequency: 40KHZ
Tank size: 240x135x100mm
Time Setting: 0-30mins
Temperature setting: 0-80℃
Gross Weight: 3.9kg/8.62lbs
Package Size: 34x25x31cm/13.38x9.84x12.20inch
Package Content:
1 x Ultrasonic Cleaner
1 x Jewelry Cleaning Basket
1 x Outlet Pipe
1 x Buckle
1 x Power Cord
1 x Jewelry Cleaning Ball
1 x Raw Tape
3.2L 60/120W
4.5L 90/180W
6.5L 90/180W
10L 120/240W
Capacity
3.2L
4.5L
6.5L
10L
Ultrasonic Power
60W/120W
90W/180W
90W/180W
120W/240W
Heating Power
100W
200W
200W
200W
Tank Size
240 x 135 x 100 mm
300 x 150 x 100 mm
300 x 150 x 150 mm
300 x 240 x 150 mm
Material
SUS304 Stainless Steel
SUS304 Stainless Steel
SUS304 Stainless Steel
SUS304 Stainless Steel
Voltage
110V
110V
110V
110V
Frequency
40KHZ
40KHZ
40KHZ
40KHZ
Time Setting
0-30 mins
0-30 mins
0-30 mins
0-30 mins
Temp Setting
Room Temperature-80℃
Room Temperature-80℃
Room Temperature-80℃
Room Temperature-80℃
15L 180/360W
20L 210/420W
22L 240W/480W
30L 300/600W
Capacity
15L
20L
22L
30L
Ultrasonic Power
180W/360W
210W/420W
240W/480W
300W/600W
Heating Power
300W
300W
500W
500W
Tank Size
300 x 300 x 150 mm
300 x 300 x 200 mm
500 x 300 x 150 mm
500 x 300 x 200 mm
Material
SUS304 Stainless Steel
SUS304 Stainless Steel
SUS304 Stainless Steel
SUS304 Stainless Steel
Voltage
110V
110V
110V
110V
Ultrasonic Frequency
40KHZ
40KHZ
40KHZ
40KHZ
Time Setting
0-30 mins
0-30 mins
0-30 mins
0-30 mins
Temperature Setting
Room Temperature-80℃
Room Temperature-80℃
Room Temperature-80℃
Room Temperature-80℃
operation steps
Add cleaning fluid to the cleaning tank as required for cleaning, at least 1/2 of the tank body.
Connect the power plug correctly, make sure that the power supply is reliably grounded!
Disassemble the parts to be cleaned as much as possible, and use high-pressure water guns, wire brushes, shovel blades or other tools to artificially assist pretreatment of the soil, heavy oil and heavy carbon deposits  on the surface of the parts to ensure the service life of the cleaning fluid And the speed and effect of cleaning.
Put the parts to be cleaned in the cleaning tank, and place them without overlapping to ensure that the parts are completely submerged by the cleaning liquid.
Parameter setting
1、Turn on the main power switch on the back of the machine, and the machine is in a power-on state;
2、Press the "time+" key once, the cleaning time will increase by 1 min, press the "time-" key once, the cleaning time will decrease by 1 min, and the time range is adjustable from 0 to 30 minutes;
3、Press the "temperature+" key once to increase the set temperature by 1°C, press the "temperature-" key once to set the temperature down by 1°C, and the temperature range is 0-80°C
Ultrasonic function setting
There are three working function options for ultrasound: normal, degassing, and
semiwave
.
Press the corresponding ultrasonic function key once, the work indicator light is on, and the machine works according to the specified parameters.
When the machine is turned on, it is in normal working condition;
Press the "Degassing" button, the degassing function will start, the degassing indicator will be on, click again to cancel the degassing function;
Press the "
Semiwave
" button, the
semiwave
function will start,  the
semiwave
indicator will be on, click the
semiwave
function again to cancel.
heating
When the machine is working, there are two temperature display screens : the set temperature value and the actual temperature value reached.
Tap the "heating" button, the actual temperature will keep flashing, and the heating function will be turned on.
If the actual temperature is lower than the set temperature, the heating indicator will light up, indicating that the heating system is heating.
If the actual temperature reaches the set temperature, the heating indicator light will go out. Then lightly press the "heating" button to stop the heating function.
When the ultrasonic is activated, the cleaning machine will make a "squeak" sound, indicating that the ultrasonic is operating normally. Generally, it is cleaned regularly for 5 to 30 minutes. After the cleaning is completed, the wave is automatically turned off, and the parts are taken out for post-processing.
Use a high-pressure water gun to remove the residues on the surface of the parts, and use an air compression gun to remove the residues in the holes. Parts that need rust prevention will be treated separately. In order to improve the cleaning effect, when time permits, the cleaning time of the parts in the cleaning solution can be appropriately extended. In the actual operation process, in order to improve the cleaning efficiency, a process flow of dismantling and cleaning can be adopted.
Disconnect the power of the whole machine when shutting down; pour out the cleaning fluid, and clean and maintain the tank and the periphery with a clean rag for the next use
Features & Details
【ULTRASONIC & DEGASSING】-Ultrasonic vibration treatment method, reliable penetrating power, high-power industrial-grade vibration head, high-frequency cleaning. The degassing function protects the product from oxidation or other chemical reactions with the air during the cleaning process, increasing gloss, and improving cleaning efficiency.
【
DEEP CLEANING & HEATING FUNCTION】- Built-in high-frequency vibration technology can excite the transducer. The cleaning frequency of 40KHz can remove stains on items in a few seconds. With a constant temperature heating function, it can improve the cleaning effect. It can heat up to 80℃.
【SMART CONTROL PANEL】- Smart control panel is more stable and durable than traditional buttons. Simple and easy to operate, the cleaning cycle time can be freely set (0-30 minutes), select the required time, and it will automatically turn off after cleaning.
【SEMIWAVE FUNCTION】- The ultrasonic jewelry cleaner has Semiwave function. You can turn on the half-wave to reduce the power (for example, 100W, only 50W after turning on the half-wave, but only for high energy, not for heating power). This function can protect some items (requires slow cleaning, cannot Strong cleaning).
【SAFETY PROTECTION】 - Double safety switches with ground wire, industrial power cord, insulated handle, high temperature, anti-static, more secure. Sonic jewelry cleaning machine adopts a 3D cooling system, fast heat dissipation, protection circuit, increase service life.
SHIPPING
DELIVERY DAYS: 1-4 DAYS (1-3 DAYS FOR 99% OF US 48 STATES)
24 HOURS SHIPPING OUT
SHIP FROM CA & TX & KY & NJ WAREHOUSE
Caifornia Warehouse: 18501 Arenth Ave, City of Industry, CA 91748
Texas
Warehouse
: 300 W Airtex Blvd, Suite 200, Houston, TX 77090
Kentucky
Warehouse
: 2125 Gateway Blvd, Hebron, KY 41048
New Jersey
Warehouse
: 1000 High Street, Perth Amboy, NJ 08861
ABOUT US
Welcome to our eBay store. As a leading and emerging company in manufacturer and exporting business, we are specialized in Business and Industrial Products, Sporting Goods, Pet Products, Home and Garden products for more than 10 years. We believe that it is our vision and mission to provide innovative products with best service and competitive price to satisfy you. Our goal is to make sure that you can find exactly what you are looking for and make it easy for you to place your orders.
PAYMENT
We accept
Pay
pal
payment only.
Payment should be completed within 4 (Four) days of auction closing. Or unpaid dispute will be filed for closing auction.
We will leave a positive feedback immediately after payment is received. We appreciate a positive feedback as much as you do. If for some reason there is any issue with the purchase, please contact us prior to leaving feedback, we will be glad to work together and provide a satisfying solution.
RETURNS
All of our items are backed with a 30-day return policy. We ensure all our items are new and in excellent condition prior to shipping. In case you receive the item that is not to the standards above, please contact us via e-Bay messages. All returns must be in new original condition as received and should be shipped with delivery confirmation
Please note that all returns must be pre-approved by us. Unauthorized returns will not be accepted. If you need to return, please check twice to confirm the item not work and contact our customer service representative, let us know the detailed problem and send us some pictures for confirmation.
We ONLY accept returns with original package. Please make sure that item has NO man-made sabotage. Used items will not be accepted for return.
CONTACT
Email Customer Support:
9:00am-2:00am
PST Sunday-Friday
All emails will be responded to within
12-24 hours
WARRANTY
This item comes with 24 months Warranty from the date of customers purchased it. Special circumstances will be listed clearly in the listing.
If your item has been damaged in transit or become faulty in warranty period, please email us with pictures or video to show the problem.
Please do check everything carefully after you received the parcel, any the damage except DOA (Dead-On-Arrival) would not be covered if it's your fault.
Replacement products are provided with the same warranty as the returned products.
On Jul-09-21 at 00:24:28 PDT, seller added the following information: